Quick Motor Free

1. Use

The Quick Motor Free is a spacious, free-standing bus awning that can be set up and taken down quickly. It can also be used independently without a vehicle. A vehicle can be parked alongside or with the rear facing the tent.

Thanks to the innovative Quick-Up system, the Quick Motor Free can be set up in a few moments. Then simply tension the pre-attached guy lines, drive the vehicle to the tent, and you're done. There is no fixed connection between the bus awning and the vehicle with the Quick Motor Free. This allows it to be used without a vehicle, or for more flexible use of the vehicle for excursions, shopping, or similar activities. An awning over each entrance protects against rain and sun. This also protects the transition to the vehicle. The connecting door to the vehicle can be opened or adjusted depending on the size of the vehicle. Additionally, a small floor can be folded out towards the vehicle, allowing for a clean and dry transition to the vehicle.

The Quick Motor Free has a small pack size of only 113 x 28 x 28 cm and weighs only 14 kg. This means it can easily fit into any bus or camper.

With its area of 320 x 320 cm and its height of 215 cm (interior dimensions), the Quick Motor Free offers plenty of space and comfortable standing height. The steeply sloping side walls allow the space to be used optimally.

The awning can be completely closed and used freestanding even without a vehicle. The huge entrance area can be fully opened, creating a huge continuous tent area. The main entrance to the tent also has a mosquito net so that no small guests can get into the tent. The bathtub-shaped floor of the bus awning offers particularly good protection against water and moisture.


The Quick-Up System:

• Remove pop-up tent from packaging and release the securing strap
• Unfold steel poles (with joints)
• Extend steel poles (roof) one after another (they click into place)
• Extend steel poles (side walls) one after another (they click into place)
• Attach fiberglass poles to roof & rear
• Secure outer tent and groundsheet with pegs, then attach guy ropes
• Drive vehicle with side or rear to the vestibule
• Adjust vestibule to the vehicle
• Enjoy the surroundings and watch others sort poles

2. Setup / Takedown

• Setup time: approx. 120 seconds
• All-in-One setup
• Robust, pre-assembled guy ropes with tensioning triangles
• Roll-in pack bag for easier packing
• Guy rope holders are easy to use and reliably secure the tent even in extreme conditions
• Reinforced steel T-pegs (diameter: 7 mm, length: 200 mm)
• Attachment height on vehicle between 175 - 210 cm (suitable for VW Bus, Mercedes Vito, Ford Custom etc. / but also for many other vehicles such as vans, SUVs, or cars)

3. Ventilation

• Huge entrance area can be fully or half/half opened
• Complete front surface made of mesh for effective and quick ventilation
• Mosquito net on the entrance door allows additional air exchange
• Huge door to the vehicle can be fully, partially, or only half opened

4. Entrances

• 1 large entrance area to the tent
• 1 large entrance area to the vehicle
• Entrance door with covered zippers including Velcro strips (weather protection)
• Robust zippers
• Loops and eyelets are attached at the entrance for fixation
• Fold-down floor in the vestibule area can be secured upwards when not in use.

5. Sleeping cabins

• not included (space can be freely divided)

7. Safety

• Tested rain resistance
• Qeedo Guyline-Connector: Particularly robust & wind-stable guying due to the special connection system between outer tent & poles
• Robust Qeedo steel poles
• Tent with completely sealed seams for maximum protection
• Robust T-peg steel pegs with plastic head allow for secure anchoring
• Robust and reliable 4,000 mm water column

Herstellerangaben gemäß EU-Produktsicherheitsverordnung (GPSR):

Hersteller: qeedo
Kontakt: service@qeedo.de
Adresse: CLICKCONCEPTS GmbH, Ferdinand-Porsche-Straße 4, 73479 Ellwangen, Deutschland